Easily Assembled Welded Wire Mesh For Construction Project
| Frame Material: | Galvanized Iron Wire | Frame Finishing: | PP 100g/m2 |
|---|---|---|---|
| Feature: | Easily Assembled, Eco Friendly | Opening Size: | 2″x4″ Or 4″x4″ |
| Roll Sizes: | 24″x100′ And 36″x100′ | UV Resistance: | 80%/500 Hours |
| Wire Gauge: | 14ga | ||
| High Light: |
pvc coated welded wire mesh, galvanized welded wire mesh panels |
||
Woven black landscape fabric welded wire back and PP landscape fabric 14 ga silt fence(UV Resistance)
14 ga silt fence, sometimes (misleadingly) called"filter fence", is a temporary sediment control device used on construction sites to protect water quality in nearby streams, rivers, lakes and seas from sediment (loose soil) in stormwater runoff.
To Properly Install 14 ga Silt Fence – Unroll fabric, stretch and drive stakes into the ground. Make sure the stakes are on the downside of the slope or facing away from the sediment. The bottom of the fabric should be buried at least six inches under the soil to prevent the sediment from escaping underneath the fencing. If connecting more than one section make sure the last stake of the first section is interlocked with the first stake of the next section. This overlap will help contain any runoff at the intersection of the two sections of the fencing.
Specifications of 14 ga slit fence
- Grab Tensile (lbs) – 111 Warp x 101 Fill
- Grab Elongation – 29%
- Trapezoid Tear (lbs) – 42×38
- Puncture – 65 lbs.
- Mullen Burst – 158.5 psi
- UV Resistance – 80%/500 hours
- Apparent Opening Size – #35 US Sieve
- Flow Rate – 17 gallons/minute/sq. Ft.
| Property | Test | 50 gram | 70 gram | 100 gram |
| Weave | 8×8 weave | 11×11 weave | 11×11 weave | |
| Grab Tensile | ASTM D4632 | 68 | 98.8 lb x 92.4 lb |
135 lbs. x 125 lbs. |
| Grab Elongation | ASTM D4632 | 14% | 27% | 15% |
| Mullen Burst | ASTM D 3786 | 230 psi | 205 psi | 200 psi |
| Puncture | ASTM D 4833 | 52 lbs. | 50 lbs. | 50 lbs. |
| Trapezoid Tear | ASTM D 4533 | 47 lbs. | 52 lbs. | 60 lbs. |
| AOS | ASTM D 4751 | 10 sieve | 40 sieve | 30 sieve |
| Flow Rate | ASTM D 4491 | 30 gal/min/ft | 24.2 gal/min/ft |
20 gal/min/ft |
| Permittivity | ASTM D 4491 | 0.03 sec | 0.05 sec | 0.1 sec |
| UV Resistance | ASTM D 4355 | 80% after 500 hrs. | 80% after 500 hrs. | 80% after 500 hrs. |
