UV Resistance Welded Wire Mesh Wire Back Silt Fence With High Durability
| Frame Material: | Galvanized Iron Wire | Frame Finishing: | PP 50g/m2, 70g/m2, 80g/m2, 100g/m2 |
|---|---|---|---|
| Feature: | Easily Assembled, Eco Friendly | Opening Size: | 2″x4″ Or 4″x4″ |
| Roll Sizes: | 24″x100′ And 36″x100′ | UV Resistance: | 80%/500 Hours |
| Color: | Orange, Black |
UV Resistance 4 x 4 Wire Back Silt Fence with Welded Wire Mesh
Wire Back Silt Fence is also called welded wire mesh fabric. It is widely used in rivers, lakes and sea. Sometimes (misleadingly) called”filter fence“, is a temporary sediment control device used on rivers. The silt fence has great ability of UV resist.
1. Specifications of 14 ga slit fence
- Grab Tensile (lbs) – 111 Warp x 101 Fill
- Grab Elongation – 29%
- Trapezoid Tear (lbs) – 42×38
- Puncture – 65 lbs.
- Mullen Burst – 158.5 psi
- UV Resistance – 80%/500 hours
- Apparent Opening Size – #35 US Sieve
- Flow Rate – 17 gallons/minute/sq. Ft.
3. Installation of Silt Fence
14 GA Silt fence is designed to pool water on your site while sediment settles out of it. In order for your silt fence to be effective, the fabric must be trenched at least six inches into the ground so that it will contain stormwater on your site (see diagram below). There are also machines that will slice the fabric into the ground. The slicing method of installation is typically faster and more effective than trenching. While this may be a big investment initially, in the long run it can save a significant amount of time in both installation and maintenance.
